Straight Single Beam CNC Folder
Precision, Durability & Efficiency
| STRAIGHT SINGLE BEAM | : | Straight Single Beam enables clean and precise bends. |
| RIGID FRAME | : | Rigid welded and assembled frame enables long lifecyle & accuracy. |
| BACKGAUGE | : | Fast 3 Level Enabled Servo Backgauges; backgauge finger that closes up to 5mm enables narrow bendings; servo backgauge to serve 600mm distance in less than 2 seconds. |
| OPERATING & CLAMPING | : | 3 Foot operating pedal for easy use; Centralized Clamping Motor gives assured equal tork and strength on both sides. |
BENEFITS
- Straight Single Beam enable clean bending without a trace
- Strong structure for high quality bends
- Time-saving through 1-man operation
- Minimal maintenance effort
- Easy software for fast programming
CONTROLS
- LBL: Line by line programming 12 ” touchscreen
- 2D graphic CNC software: 15 ” touchscreen
STANDARD EQUIPMENT in Straight Single Beam
The following equipment is possible depending on the version (working length/control):
- Straight Single Beam : Sharp Rail 30° R 1 mm offset
- Motorized backgauge 3 – 1000mm
- Insert rail 7/10 mm
- Insert rail 25 mm
- Fotpedal 3 pedal
- Ball transfers in backgauge table
ADD-ONS – OPTIMISE YOUR SAVIKA
The following add-ons are possible depending on the version (working length/control):
- Combi beam with segmented box tools
- 5 – 1550 mm motorized backgauge with 3 stations (under 3 sec for positioning)
- 2D Graphic software
- Motorized folding beam adjustment
- Squaring arm on backgauge side
- U shape backgauge L shape backgauge
- Radius rails
TECHNICAL DATA
| MODEL | S 2625 | S 3220 | S 4115 |
| WORKING LENGTH (mm) | 2600 | 3200 | 4100 |
| Steel (400N/mm²) (mm) | 2,50 | 2,00 | 1,50 |
| Stainless steel (600N/mm²) (mm) | 1,75 | 1,25 | 0,90 |
| Cooper (300N/mm²) (mm) | 2,50 | 2,00 | 1,50 |
| Aluminium (250N/mm²) (mm) | 3,50 | 2,00 | 1,50 |
| Zinc (150N/mm²) (mm) | 3,50 | 3,00 | 1,00 |
| Length (mm) | 3820 | 4420 | 5320 |
| Depth (mm) | 2270 | 2270 | 2270 |
| Overall height (mm) | 1810 | 1810 | 1810 |
| WEIGHT (kg) | 3170 | 3500 | 4210 |
| CLAMPING BEAMS Opening height (mm) | 140 | 140 | 140 |
Safety buttons on each side of the frames to reach from any side
Large table also with U or L Shape configuration options enabled
Quick lock for Bottom Blade & Easy manual crowning setting
Standard safe guards on sides of bending area to protect operator
Easy adjustment of lower beam height and setback
Easily moving acrobat arm for controller with 1200mm radius enables to work in the back
3 Pedals standard foot controls enabled